How to Maintain the Paper Making Machine Forming Wire?

The paper making forming wire is necessary and consumable,so how to maintain the paper making machine forming wire?


1.Usually, it is necessary to pay attention to whether the carrier roll is working normally to prevent the forming wire from deviating.


2.The paper making forming wire that has just been put on the machine should not be tightened to the end immediately. It should be wet and crawl under a lower tension to make the entire tension of the wire balanced, and then slowly tighten the forming mesh to the specified range of the process.


3.Strengthen the washing of the paper machine forming wire. To use a good high pressure swing to wash the spray pipe, when the wire is pasted, it can be washed with low-concentration lye or acid solution.


4.Before each wire change, be sure to carefully check whether the surface of each dewatering element and roller is smooth and free of burrs and sharp blisters.Necessary treatment or replacement of defective dewatering elements or rollers. In addition, it is necessary to maintain the tightness of the carrier roll doctor blade to prevent the paper machine mesh from being entangled.


5.When the paper machine is shut down for a long time, the forming wire should be loosened to prevent excessive local stress.


Leizhan Paper Machinery is an enterprise specializing in the design, manufacture and sales of complete sets of pulp and papermaking equipment,There are more than 200 employees, including more than 50 engineers and technicians,10 senior engineers.Welcome contact us for paper mill solution anytime.