China D Type Hydrapulper for Pulping and Paper Machine

ZDSD series D-type hydraulic pulper is mainly used for crushing all kinds of pulp board, broke paper and all kinds of waste paper.

This type of D-type hydraulic pulper is based on the existing traditional pulper, with reference to foreign advanced technology designed. Its main features are: Vokes rotor off center, making the paper material and the rotor contact more quickly, the frequency is higher. The traditional hydrapulper produces an unobstructed swirling flow of paper stock from the helix path to the central rotor. The D-type hydraulic pulper changes the flow pattern, making the paper more quickly and the rotor contact, which can shorten the time from the paper material added to the crushing process, and without increasing the power and volume of the case Improve production capacity.

D-type hydraulic pulper generally equipped with stranding machines and sediment wells, stranding machine to remove long strip of winding impurities, such as plastic bags, rope, wire, etc., recommended stranding machine model JSJ1. At the bottom of the tank there is a rectangular interface which is connected to the sediment well for continuous production of plastic foam and other light contaminants through an impure roughing machine. The heavy debris deposited at the bottom of the sediment well is periodically discharged. The interface can also be equipped with heavy slag collection tank to achieve intermittent production.

ZDSII series D-type hydraulic pulper by the D-tank body, rotor devices, legs, motors, motor rails, shields and other Lord

To the components

1, D-shaped tank welded by the plate, the upper mouth of the channel, to strengthen the tank, the cone at the bottom of the baffle, in order to promote the circulation of slurry back to form. The bottom of the tank has a rectangular interface for the discharge of impurities, the mouth by the user according to process needs on-site out.

2, the rotor device: the rotor and the pulp plate above the tank bottom plane, forming a low-pressure flow around the rotor area to gather heavy impurities, when heavy impurities deposited to the bottom of the tank, due to the rotation of the slurry was brought Sediment wells or heavy slag collection tank. This reduces rotor contact with contaminants, prolongs the service life of the rotor, and prevents twisting of the strands on the rotor to protect the strands and the rotor from damage.

The rotor adopts energy-saving Vokes rotor, the rotor body is made of cast steel; the material of the blade is tool steel, which is fastened by bolts to the rotor blade after heat treatment and can be replaced after being worn; the material of the sieve plate is wear-resistant stainless steel, Bottom knife, the bottom of the rotor blade and the underside of the sieve bottom knife is initially set to 2mm, the gap can be adjusted with adjusting bolts as needed.

3, outriggers: outrigger welded steel plate, used to support the tank and rotor devices.